Light-Absorbing and light-Emitting Toponym Mark System
Luming Corporation is one of the qualified manufactures authorized by the National Toponym Standardization Technical Committee. Light-absorbing and light emitting toponym mark products strictly follow the GB17733.1-1999Toponym Marks, Urban and Rural) on matter in material structure or letterform typeset.
To ensure the performance quality, this product adopts aluminum sheets in preparation process to deoil, degrease and chromize to add the adhesive power. For paint selection, we select the epoxy paint with the best adhesive power as the basal paint. In addition, Luming has developed more a useful light absorbing luminescent pigment aiming at toponym marks. This new pigment has small deviation range for particle diameters and long afterglow time. We also adopt integument process for the light absorbing pigments in order to enable luminescent powers to better joint with the organic resins and enhance the integral performance of the products.
Performance:
? Absorbing lights in bright and emitting lights in darkness
Absorbing all kinds of visible lights such as daylight, lamplight and environmental stray light; automatically and continuously emitting light in darkness; providing people with more information indications
? With acrylic polyurethane enamel as the surface enamel and coating varnish, this product has good decoration effect and over five years of outside endurance.
? This product is a new generation of environmental luminescent pigment with high chemical stability and without toxins and radioactivity.
? With high brightness, long afterglow time and long service life
? Strictly following the National Toponym Standard and meeting all national standard
Detecting Index
|
Detecting Item |
Index |
| Impact strength, kg.cm, less than |
40 |
| Adhesive power (block out method) |
2 |
| Flexibility, mm, less than |
1 |
| Moisture and heat resistance (Temperature 47±1?, relevant humidity 94%~98%) 72 hours |
Non-foaming, non-abscission |
| Water resistance (72 hours) |
Non-foaming, non-abscission |
| Petrol resistance (Immersing in the petrol Sy/1028-65, 5 hours) |
Non-foaming, non-abscission |
| Brine resistance |
Non-foaming, non-abscission |
Product Series
|
Product |
Spec(mm) |
External Appearance |
Primary Brightness |
10h Brightness |
| LMDP--J |
1200×300×1 |
2/5sections on the top show the Chinese character toponym, 3/5 sections on the bottom show the number for the toponym with blue as the background color and luminescent yellowish blue as the character color. |
6000 |
3 |
| LMDP--X |
450×150×1 |
3/5 sections on the top show the Chinese character for the tiponym and the 2/5 sections on the bottom show the Chinese pinyin. Blue is the background color for direction from east to west and green is the background color for direction from south to north. All characters are luminescent yellowish blue. |
6000 |
3 |
| LMDP--L |
900×500×1 |
3/5 sections in the left show the toponym; the Chinese pinyin and post code and 2/5 sections on the top show the Chinese character; 1/5 section in the middle shows the Chinese pinyin; 1/5 section on the bottom shows post code; character background in the left is blue; building number in the right is white, character in the left is luminescent yellowish blue; building number in the right is red and the edge is luminescent yellowish blue. |
6000 |
3 |
| LMDP--M1 |
150×90×1 |
2/5 sections on the top show the toponym in Chinese character; 3/5 sections on the bottom show the number of the region, the background is in blue and the characters are in luminescent yellowish blue. |
6000 |
3 |
| LMDP--M2 |
600×400×1 |
1/5 section on the top shows the toponym in the Chinese character, 3/5 sections in the middle show the number for the region, the background is in blue and the characters are in luminescent yellowish blue. |
6000 |
3 |
|
|
